Bondtech CHT Coated Brass Nozzle (MK8 Hotend) - 1.75mm Filament - All Sizes

ALERT : Avoid Cold Bondtech CHT Nozzles Change

Heat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. Use at most 1.5 Nm torque. Click here to see our 1.5Nm torque wrench from Slice Engineering (requires adapter for MK8 nozzles).

Main Bondtech CHT® Advantages

• Higher melt capacity by increasing the surface area of the heating walls
• Affordable price
• Machined with ultra-precision
• Brass nozzle with Nickel coated surface
• May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT® technology:

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

These are nozzles for High Flow applications

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks:

• bq Hephestos
• Hephestos 2
• bq Prusa i3 Hephestos
• bq Witbox
• bq Witbox 2
• Creality CR-10
• Creality CR-10-S4
• Creality CR-10-S5
• Creality CR-10S
• MakerBot Replicator
• MakerBot Replicator 2
• MakerBot Replicator 2X
• Creality Ender 2
• Creality Ender 3 Pro
• Creality CR-20 Pro
• Creality Ender 5
• Craftbot family
• Creality CR-10 V2
• Creality CR-6 SE
• Creality CR-10 Smart
• Tevo Tornado

• 1 unit per pack;
• Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm;
• Lengths:
  • nozzle : 12.5mm;
  • M6x1 thread : 6mm;
  • nozzle neck : 7.5mm.
• Optimized for 1.75mm filament;
• Compatible with 2.85mm filament.
• Requires 8mm wrench