Skip to product information
1 of 1

Bondtech CHT Coated Brass Nozzle (V6/M6 Thread) - 1.75mm Filament - All Sizes

Bondtech CHT Coated Brass Nozzle (V6/M6 Thread) - 1.75mm Filament - All Sizes


Regular price £16.99
Regular price Sale price £16.99
Sale Sold out
Tax included. Shipping calculated at checkout.

ALERT : Avoid Cold Bondtech CHT Nozzles Change

Heat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. Use at most 1.5 Nm torque. Click here to see our 1.5Nm torque wrench from Slice Engineering.

Main Bondtech CHT® Advantages
  • Higher melt capacity by increasing the surface area of the heating walls
  • Affordable price
  • Machined with ultra-precision
  • Brass nozzle with Nickel coated surface
  • May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT® technology:

Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

These are nozzles for High Flow applications

They are manufactured by Bondtech in-house, and will fit the following hotends/blocks:

  • Mosquito® / Magnum
  • Mosquito® Liquid
  • Mosquito® Magnum+
  • Copperhead™
  • E3D Chimera and Kraken
  • E3D V4, V5 and V6 blocks
  • Prusa i3, Prusa Mini
  • RepRap M6
  • BambuLab X1 (aftermarket hotend)
  • 1 unit per pack;
  • Available sizes : 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm;
  • Lengths:
    • nozzle : 12.5mm;
    • M6x1 thread : 6mm;
    • nozzle neck : 7.5mm.
  • Optimized for 1.75mm filament;
  • Compatible with 2.85mm filament.
  • Requires 6mm wrench

View full details